Saskatchewan Registration Requirements
Codes and Standards Compliance Office
Boiler and Pressure Vessel Safety Board
Technical Safety Authority of Saskatchewan
2202 2nd Avenue
Canada S4R 1K3
Application form for the Registration of Designs (caution – as of Oct 2014, versions on TSASK website are obsolete)
Saskatchewan statutory declaration form
Summary of Registration Requirements:
Pressure Vessel – 2 sets of drawings with P.Eng stamp, 1 set of design calculations
Fitting – 2 sets of drawings, 1 set of design calculations, application form and 2 original notarized statutory declaration forms.
Fee Schedule Payment is required up front, send the minimum amount below with submission. TSask will invoice any additional charges if the review time is longer than the 2 hours minimum.
Standard – $319 minimum (2 hours) + $146/hour after 2 hours, 14-16+ weeks typically
Expedited – $470 Minimum (2 hours) + $219/hour after 2 hours, 10 days typically
Rush – $903 minimum (2 hours) + $438/hour after 2 hours, 3 days typically
TSASK charges an additional $11 ($10.48 + GST) to return stamped drawings if you require (include with up front payment).